Clear product families, not a crowded catalogue.
Seventeen catalyst grades and seven inhibitors, organised by the problem each one solves. Every grade is supplied with a TDS, a batch-linked COA and sample quantities for evaluation.
Three ways to reach the right grade.
Most buyers arrive with one of three questions: which property do I need, which application am I in, or which concentration does my line run. Start from whichever is clearest.
By performance requirement
Anti-yellowing, high temperature, anti-poisoning, high refractive index or standard curing.
By application
PPF, release liners, optical films, medical LSR, potting and high-voltage insulation.
By concentration
From 1,500 PPM for cost-sensitive compounding to 5,000 PPM for fast cross-linking.
Five catalyst series.
Each series below is a full range with its own concentration ladder and application focus.
Standard Karstedt's Catalysts
Six concentration grades covering mainstream addition-cure silicone.
High-Activity & Anti-Poisoning Catalysts
Upgraded activity and substrate resilience for demanding lines.
Thermal Stability & Anti-Yellowing Catalysts
ΔE 0.8 versus 4.2 after 85°C / 48 h accelerated aging.
Advanced Anti-Poisoning Catalysts
Curing stability where sulfur, phosphorus and nitrogen are present.
Optical Grade High-Refractive-Index Catalysts
RI above 1.50 with complete solubility and zero turbidity.
All catalyst grades at a glance.
Use this table to shortlist, then open a grade for the full specification, dosage guidance and pairing inhibitors.
| Model | Series | Platinum concentration | Viscosity | Status |
|---|---|---|---|---|
| PC-11 | Standard Series | 1,500 PPM | 400–500 cP | Available |
| PC-12 | Standard Series | 5,000 PPM | 400–500 cP | Available |
| PC-13 | Standard Series | 3,000 PPM | 400–500 cP | Available |
| PC-14 | Standard Series | 4,000 PPM | 400–500 cP | Available |
| PC-15 | Standard Series | 2,000 PPM | 400–500 cP | Available |
| PC-16 | Standard Series | 4,000 PPM-1 | 400–500 cP | Available |
| PC-41 | High-Activity Series | 1,500 PPM | 400–500 cP | Available |
| PC-43 | High-Activity Series | 3,000 PPM | 400–500 cP | Available |
| PC-44 | High-Activity Series | 4,000 PPM | 400–500 cP | Available |
| PC-45 | High-Activity Series | 2,000 PPM | 400–500 cP | Available |
| PC-46 | High-Activity Series | 4,000 PPM-1 | 400–500 cP | Available |
| PC-42 | Anti-Yellowing Series | 5,000 PPM | 300–500 cP | Available |
| PC-50 | Anti-Yellowing Series | Custom (1,000–20,000 PPM) | 5–50 cP | Available |
| PC-51 | Anti-Yellowing Series | Custom (1,000–20,000 PPM) | 5–50 cP | Available |
| PC-18B | Advanced Anti-Poisoning | Custom (1,000–20,000 PPM) | 400–500 cP | Available |
| PC-18A | Advanced Anti-Poisoning | Custom (1,000–20,000 PPM) | 400–500 cP | R&D · sample |
| GZ-5 | Optical Grade | Custom (1,000–20,000 PPM) | 400–800 cP | Available |
Platinum concentration is the nominal active Pt content. Custom concentrations from 1,000 to 20,000 PPM are available on request; all grades are supplied in 1 kg, 5 kg and 20 kg sealed HDPE drums.
What arrives at the plant.
A sample bottle and the production pack sizes. Every container is sealed, labelled with grade and batch, and shipped with a COA for that batch.


The pot life control system.
Curing time is set by the inhibitor, not by the catalyst. Seven grades cover ambient cure, medium-high temperature cure, high-efficiency alkynol chemistry and high-refractive systems.
Medium-to-high temperature
The default inhibitor for medium-to-high temperature cure systems. Buys bench and line time without slowing the cure once the part reaches temperature.
Medium-to-high temperature
For plants that need a full week of pot life and still want the same hot cure. Same dosage window as PC-611, longer open time.
Ambient / low temperature
For ambient-cure systems and heat-sensitive substrates. Lets the compound cure in minutes to hours at room temperature without an oven.
Ambient / low temperature
Ambient-cure inhibitor with a longer hold and lower viscosity than PC-613, for formulations that need more working time at room temperature.
High efficiency, non-hazardous
A silicone-modified alkynol inhibitor: strong inhibition at a tenth of the usual dosage, non-hazardous, and a crisp cure at about 140°C. Best cost-performance in the range.
High-RI systems
Inhibitor for high-RI systems that need low-to-medium temperature cure. Designed to pair with GZ-5 without clouding the optical compound.
1,000 to 20,000 PPM, in practical bands.
Concentration is not a quality grade — it is a way to match catalyst loading to line speed, section thickness and inhibitor dosage. Standard grades cover the most common bands; anything between them is supplied to order.
Request a sample or get a quote
Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.