Technical notes from the curing line.
Eight articles written for formulators and process engineers: how to diagnose a batch that will not cure, how concentration is chosen, what anti-yellowing data does and does not show, and which documents a compliant supplier should provide.
Catalyst poisoning: sulfur, phosphorus, nitrogen and heavy metals
Where the contaminants come from, how to confirm poisoning rather than under-dosing, and what anti-poisoning grades can and cannot fix.
Diagnosis and formulation.
Diagnosis and formulation: why a batch fails, how concentration is chosen, how addition cure compares with peroxide cure, and how inhibitors set working time.
Why is my silicone rubber not curing? Six root causes
Before you add more catalyst, rule out the six causes that account for most addition-cure failures — from poisoning to mixing order.
Platinum catalyst PPM: how to choose between 1,000 and 20,000
Concentration is not a quality grade. A practical way to select PPM from line speed, section thickness and inhibitor dosage.
How to extend silicone pot life without slowing the cure
The inhibitor is the control knob for working time. How dosage, type and temperature interact, with a starting matrix.
Karstedt's catalyst or peroxide cure: the real trade-offs
Why medical and food-contact silicone moved to addition cure, and where peroxide still wins on cost and tolerance.
Process-specific evidence.
Process-specific evidence: colour data for PPF top coats, high-refractive-index systems for Mini LED encapsulation, and what the test conditions actually mean.
Anti-yellowing catalyst for PPF: what the ΔE data actually shows
ΔE 0.8 against 4.2 after 48 hours at 85°C — how the test is run, what it does and does not predict, and how to reproduce it.
High-refractive-index silicone for Mini LED: why the catalyst matters
Haze in high-RI systems usually starts with catalyst solubility, not with the dispensing process. What to check before changing the line.
Documentation and claims.
Documentation and claims: which records a silicone buyer should receive, what each one covers, and which statements deserve a second question.
Three search intents, three destinations.
Every article here is written to answer one question and then hand the reader to the page that resolves it. The pattern is deliberate: the article earns the search traffic, the product or application page closes the technical decision.
Go to the product page
A query for a grade or a concentration — a 5,000 PPM catalyst, PC-42, GZ-5 — belongs on the product page, where the specification table, dosage guidance and inhibitor pairing live.
Go to the application page
A query about yellowing, haze, migration or a pot that will not cure belongs on the application page or the article that links into it, because the cause is process-specific.
Go to the topic page
A query about RoHS, REACH, VOC content or documentation belongs on the compliance topic page and the checklist article, not on a marketing page.
Articles are written in English, describe mechanisms and test conditions rather than guarantees, and link only to data that exists on the site. Product grades that are still under R&D are labelled as evaluation-only wherever they appear.
Looking for a specific grade or document?
Search across catalysts, inhibitors, applications, case studies and these articles — or send the process details and we will point you to the right page.
Turn an article into a formulation decision
If a symptom in one of these articles matches your line, send the cure temperature, substrate and current catalyst dosage. We reply with a recommendation and a sample plan.