Pot life control system

PC-613

For ambient-cure systems and heat-sensitive substrates. Lets the compound cure in minutes to hours at room temperature without an oven.

Dosage 0.1%–1.0%Ambient / low temperature Available
Specification

Cure behaviour.

Cure behaviourRoom-temperature or low-temperature cure: complete vulcanisation within minutes to a few hours at ambient.
AppearanceColorless viscous liquid, 300–500 cP, nearly odourless
Recommended dosage0.1%–1.0%
ClassificationSee SDS; alkynol grades are non-hazardous
Key properties

Why use PC-613.

  • Ambient cure in minutes to hours
  • Suited to heat-sensitive substrates
  • Nearly odourless
Dosage note

Start at the lower end of the dosage range and increase in steps. Over-dosage shows as a soft or tacky cure; under-dosage shows as a short bath life or scorch in the mixing vessel.

Pairs with

Catalyst pairing.

PC-613 is supplied as part of a complete curing system. We recommend trialling it with the catalysts below so the ratio reflects your actual process window.

Start the trial

Request a paired sample set.

We ship the inhibitor together with the catalyst grade so the first lab trial is representative of your production ratio.

Next step

Request a sample or get a quote

Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM