Pot life control system

PC-617

A silicone-modified alkynol inhibitor: strong inhibition at a tenth of the usual dosage, non-hazardous, and a crisp cure at about 140°C. Best cost-performance in the range.

Dosage 0.01%–0.20%High efficiency, non-hazardous Available
Specification

Cure behaviour.

Cure behaviourStrong inhibition with complete cure at approximately 140°C. Non-hazardous classification.
AppearancePale yellow liquid, silicone-modified alkynol
Recommended dosage0.01%–0.20%
ClassificationSee SDS; alkynol grades are non-hazardous
Key properties

Why use PC-617.

  • Non-hazardous classification
  • Dosage 0.01%–0.20%
  • Complete cure at about 140°C
Dosage note

Start at the lower end of the dosage range and increase in steps. Over-dosage shows as a soft or tacky cure; under-dosage shows as a short bath life or scorch in the mixing vessel.

Pairs with

Catalyst pairing.

PC-617 is supplied as part of a complete curing system. We recommend trialling it with the catalysts below so the ratio reflects your actual process window.

Start the trial

Request a paired sample set.

We ship the inhibitor together with the catalyst grade so the first lab trial is representative of your production ratio.

Next step

Request a sample or get a quote

Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM